Uncompromising quality
Uncompromising quality
Uncompromising quality
Uncompromising quality
Uncompromising quality
Uncompromising quality
C45 (UNI-7845)
PROPERTIES AND EMPLOYEMENTS
IT IS ONE OF THE MOST COMMONLY EMPLOYED QUENCHED AND TEMPERED STEEL WITH CARBON IN EUROPE. IT IS SUITABLE FOR SURFACE HARDENING AND IT GUARANTEES AN ELEVATED SUPERFICIAL HARDNESS.
CORRESPONDENCE TO INTERNATIONAL DESIGNATIONS
| QUALITY | EUROPE | GERMANY | FRANCE | SPAIN | G.B. | USA | |
|---|---|---|---|---|---|---|---|
| EN | DIN | W.n. | AFNOR | UNE | B.S. | AISI/SAE | |
| C45 | 2C45 | CK45 | 1,1191 | XC48H1 | F1140 | 080M46 | 1045 |
CHEMICAL COMPOSITION % (UNI-7845)
| STEEL DESIGNATION | CHEMICAL COMPOSITION | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| SYMBOLIC | NUMERIC | C |
Si max |
Mn |
P max |
S max |
Cr max |
Mo max |
Ni max |
Cr + Mo + Ni maxd |
| C45 | 1,0503 | 0,42 ÷ 0,50 | 0,40 | 0,50 ÷ 0,80 | 0,045 | 0,045 | 0,40 | 0,10 | 0,40 | 0,63 |
CONCENTRATION LIMITS OF THE ELEMENTS THAT ARE NOT INDICATED IN THE TABLE CAN BE DEDUCED IN THE EN 10020 REGULATION.
MECHANICAL CHARACTERISTICS (UNI-7845)
| STEEL | MECHANICAL CHARACTERISTICS FOR THE REDUCED SECTION (EN 10083-1:2006, ATTACHMENT A) WITH A DIAMETER (D) OF | |||||||||||||||
| d ≤ 16mm | 16mm < d ≤ 40mm | 40mm < d ≤ 100mm | ||||||||||||||
| SYMBOLIC | NUMERIC | Re min | Rm | A min | Z min | KVb min | Re min | Rm | A min | Z min | KVb min | Re min | Rm | A min | Z min | KVb min |
| N/mm2 | % | % | J | N/mm2 | % | % | J | N/mm2 | % | % | J | |||||
| C45 | 1,0503 | 490 |
700 to 850 |
14 | 35 | - | 430 |
650 to 800 |
16 | 40 | - | 370 |
630 to 780 |
17 | 45 | - |
USUALLY AVAILABLE EX STOCK
| M.T. COLORATION | QUALITY | HEAT TREATMENT | SURFACE | DIAMETER (mm) |
|---|---|---|---|---|
 |
C45 | Natural |
rolled reeled forged turned peeled h11 / drawn ground |
20-330 340-1000 5-160 4-160 |
 |
C45 | Quenched and tempered | rolled reeled | 30-200 |
 |
Download technical sheet |
Steels
Our steel always comes from the same European steelworks, which guarantee a continuity for what concerns quality. The constant quality of the supplies allows to have repetitive parameters in mechanical processing and a greater control over deformations during heat treatment.
Machining
Precise cuttings of small and big series are guaranteed by the employement of latest generation automatic saws that were projected and realized in order to guarantee precision standards required by customers, reducing processing wastage.
Quality
The certification and introduction of the Quality System management allowed M.T.Acciai to improve not only its efficiency, but also the quality that is offered, in order to better meet our customers’ needs.