Home » Steels » Hot work creep steels (ASTM A182) » F22 class 3 standardised, stress relieved / annealed
Uncompromising quality
Uncompromising quality
Uncompromising quality
Uncompromising quality
Uncompromising quality
Uncompromising quality
chiusura estiva / summer closing: 05-26 Agosto/August
F22 cl.3 (ASTM A182)
F22 cl.3 (102CrMo9-10), IS THE MOST COMMONLY USED FOR THE APPLICATIONS WHERE IT IS REQUIRED A GOOD RESISTANCE TO CREEP UP TO 600°C, FOR EXAMPLE IN THERMAL AND NUCLEAR POWER PLANTS AND FOR ROTORS OR PIPINGS THAT TRANSPORT HOT FLUIDS UNDER PRESSURE.
CORRESPONDENCE TO INTERNATIONAL DESIGNATIONS
| QUALITY | EUROPE | GERMANY | FRANCE | SPAIN | G.B. | USA | |
|---|---|---|---|---|---|---|---|
| EN | DIN | W.n. | AFNOR | UNE | B.S. | ASTM | |
| F22 cl.3 | 10CrMo9-10 EN 10222-2 | ~ 10CrMo9-10 | 1,7380 | ~ 12CD9-10 | F2632 | 622-515 |
ASTM A182 F22 ASME SA 182 |
CHEMICAL ANALYSIS
| C | Mn |
Si max |
P max |
S max |
Cr | Mo |
|---|---|---|---|---|---|---|
| 0,05 ÷ 0,15 | 0,30 ÷ 0,60 | 0,50 | 0,040 | 0,040 | 2,00 ÷ 2,50 | 0,87 ÷ 1,13 |
CONCENTRATION LIMITS OF THE ELEMENTS THAT ARE NOT INDICATED IN THE TABLE CAN BE DEDUCED IN THE EN 10020 REGULATION.
MECHANICAL CHARACTERISTICS
| STEEL | NORMALISATION TEMPERATURE 900°C MIN – TEMPERING TEMPERATURE 620°C MIN | |||||
| SYMBOLIC | Re min | Rm min | A min | Z min | Durezza HB | |
| N/mm2 | % | % | max | |||
| F22 | 310 | 515 | 20 | 30 | 156÷207 | |
USUALLY AVAILABLE EX STOCK
| M.T. COLORATION | QUALITY | HEAT TREATMENT | SURFACE | DIAMETER (mm) |
|---|---|---|---|---|
 |
F22 cl.3 | Normalised and stress relieved | rolled / forged turned | 40-400 |
 |
F22 cl.3 | Annealed | rolled | 40-220 |
 |
Download technical sheet |
Steels
Our steel always comes from the same European steelworks, which guarantee a continuity for what concerns quality. The constant quality of the supplies allows to have repetitive parameters in mechanical processing and a greater control over deformations during heat treatment.
Machining
Precise cuttings of small and big series are guaranteed by the employement of latest generation automatic saws that were projected and realized in order to guarantee precision standards required by customers, reducing processing wastage.
Quality
The certification and introduction of the Quality System management allowed M.T.Acciai to improve not only its efficiency, but also the quality that is offered, in order to better meet our customers’ needs.