Uncompromising quality
Uncompromising quality
Uncompromising quality
Uncompromising quality
Uncompromising quality
Uncompromising quality
B16 (40CrMoV4-6)
CORRESPONDENCE TO INTERNATIONAL DESIGNATIONS
| QUALITY | EUROPE | GERMANY | FRANCE | SPAIN | G.B. | USA | |
|---|---|---|---|---|---|---|---|
| EN | DIN | W.n. | AFNOR | UNE | B.S. | AISI/SAE | |
| B16 | 40CrMoV4-6 | 40CrMoV4-6 | 40CrMoV4-6 | 1506-661 | ASTM-A193 B16 | ||
CHEMICAL ANALYSIS (ASTM A193)
| STEEL DESIGNATION | CHEMICAL COMPOSITION | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| SYMBOLIC | C | Mn | Si |
P max |
S max |
Cr | Mo | V |
Al max |
| B16 | 0,36 ÷ 0,47 | 0,45 ÷ 0,70 | 0,15 ÷ 0,35 | 0,035 | 0,040 | 0,80 ÷ 1,15 | 0,50 ÷ 0,65 | 0,25 ÷ 0,35 | 0,015 |
CONCENTRATION LIMITS OF THE ELEMENTS THAT ARE NOT INDICATED IN THE TABLE CAN BE DEDUCED IN THE EN 10020 REGULATION.
MECHANICAL CHARACTERISTICS
| STEEL | NORMALISATION TEMPERATURE 900°C MIN – TEMPERING TEMPERATURE 620°C MIN | |||||
| SYMBOLIC | Re min | Rm min | A min | Z min | Hardness HB max | |
| N/mm2 | % | % | J | |||
| B16 | 655 | 760 | 17 | 45 | 321 | |
USUALLY AVAILABLE EX STOCK
| M.T. COLORATION | QUALITY | HEAT TREATMENT | SURFACE | DIAMETER (mm) |
|---|---|---|---|---|
 |
B16 (40CrMoV4-6) | Quenched and tempered | rolled | 70-150 |
 |
Download technical sheet |
Steels
Our steel always comes from the same European steelworks, which guarantee a continuity for what concerns quality. The constant quality of the supplies allows to have repetitive parameters in mechanical processing and a greater control over deformations during heat treatment.
Machining
Precise cuttings of small and big series are guaranteed by the employement of latest generation automatic saws that were projected and realized in order to guarantee precision standards required by customers, reducing processing wastage.
Quality
The certification and introduction of the Quality System management allowed M.T.Acciai to improve not only its efficiency, but also the quality that is offered, in order to better meet our customers’ needs.