Uncompromising quality
Uncompromising quality
Uncompromising quality
Uncompromising quality
Uncompromising quality
Uncompromising quality
Case-hardening steels
Case-hardening steels are employed for the fabrication of mechanical parts that have to be hardened through heat treatments of carboncementation, carbonitriding, followed by quenching and tempering, so that you can obtain a hard surface, characterized by toughness and resistance at heart.
Not only an excellent resistance at heart, but also a high mechanical wear resistance is obtained.
To obtain elevated toughness, steels with a high percentage of nickel will be preferred.
Case-hardening steels are employed to build gears, shafts, linchpins, mechanical parts for the adaptors sector, industrial, automotive and mechanical parts in general.
The eligibility of the case-hardening treatment depends on the steel's quality, on the austenitic grain size that is formed during the treatment and on the percentage of carbon and alloy elements, which change for each quality.
CASE-HARDENING STEELS (EN 10084)
| QUALITY | SURFACE CONDITION | DIAMETER (mm) |
|---|---|---|
| 16MnCr5 Machinable Annealing |
rolled drawn / peeled h11 |
20-210 18-80 |
| 16MnCr5 Machinable Annealing High Machinability |
rolled peeled h11 |
20-80 19-78 |
| 20MnCr5 Machinable Annealing |
rolled forged turned drawn / peeled h11 |
20-300 310-500 16-80 |
| 20MnCrS5 Isothermal Annealing | rolled | 40-170 |
| 20MnCr5 Machinable Annealing High Machinability |
rolled peeled h11 |
20-80 19-78 |
| 16NiCr4 Machinable Annealing |
rolled drawn / peeled h11 |
20-260 16-80 |
| 16NiCr4 Machinable Annealing High Machinability |
rolled peeled h11 |
20-80 19-78 |
| 16NiCr4+Pb Machinable Annealing |
rolled drawn / peeled h11 |
24-160 5-100 |
| 17NiCrMoS6-4 Machinable Annealing |
rolled forged turned drawn / peeled h11 |
20-320 330-1200 20-80 |
| 17NiCrMoS6-4 Isothermal Annealing | rolled | 90-170 |
| 17NiCrMoS6-4 Machinable Annealing High Machinability |
rolled peeled h11 |
20-80 19-78 |
| 17NiCrMoS6-4+Pb Machinable Annealing |
rolled drawn / peeled h11 |
20-200 5-100 |
| 16NiCrMo12 Annealing | rolled | 20-250 |
| 18CrNiMo7-6 Machinable Annealing |
rolled reeled forged turned |
40-220 230-490 |
| ZF1A (18CrNiMo7-6~) Annealing |
rolled reeled forged turned |
40-220 230-490 |
| ZF7B (20MnCrB5~) Annealing | rolled reeled | 50-250 |
Steels
Our steel always comes from the same European steelworks, which guarantee a continuity for what concerns quality. The constant quality of the supplies allows to have repetitive parameters in mechanical processing and a greater control over deformations during heat treatment.
Machining
Precise cuttings of small and big series are guaranteed by the employement of latest generation automatic saws that were projected and realized in order to guarantee precision standards required by customers, reducing processing wastage.
Quality
The certification and introduction of the Quality System management allowed M.T.Acciai to improve not only its efficiency, but also the quality that is offered, in order to better meet our customers’ needs.