• Uncompromising quality

  • Uncompromising quality

  • Uncompromising quality

  • Uncompromising quality

  • Uncompromising quality

  • Uncompromising quality

ZF7B (CAP.ZF) (16MnCrB5~)

 

CORRESPONDENCE TO INTERNATIONAL DESIGNATIONS

QUALITY EUROPE GERMANY FRANCE SPAIN G.B. USA
EN DIN W.n. AFNOR UNE B.S. AISI/SAE
ZF7B 16MnCr5+Boro            

CHEMICAL COMPOSITION % (EN 10084)

STEEL DESIGNATION CHEMICAL COMPOSITION
SYMBOLIC NUMERIC C Si
max
Mn P
max
S Cr Mo Ni B
ZF7B CAP.ZF 0,15 ÷ 0,20 0,40 1,10 ÷ 1,40 0,025 0,02 ÷ 0,035 1,00 ÷ 1,30     0,001 ÷ 0,003

CONCENTRATION LIMITS OF THE ELEMENTS THAT ARE NOT INDICATED IN THE TABLE CAN BE DEDUCED IN THE EN 10020 REGULATION.

JOMINY HARDENABILITY (ZF)

STEEL DESIGNATION RANGE LIMITS HRC HARDNESS MEASURED FROM THE QUENCHED END OF THE TEST TUBE (MM)
SYMBOLIC NUMERIC 5 10 25
ZF7B CAP.ZF max 39 35 27
min 43 39 31

USUALLY AVAILABLE EX STOCK

M.T. QUALITY HEAT TREATMENT SURFACE DIAMETER (mm)
ZF7B (20MnCrB5) Soft-annealed rolled reeled 115-180

 

 
Download technical sheet

Steels

Our steel always comes from the same European steelworks, which guarantee a continuity for what concerns quality. The constant quality of the supplies allows to have repetitive parameters in mechanical processing and a greater control over deformations during heat treatment.

View more

Machining

Precise cuttings of small and big series are guaranteed by the employement of latest generation automatic saws that were projected and realized in order to guarantee precision standards required by customers, reducing processing wastage.

View more

Quality

The certification and introduction of the Quality System management allowed M.T.Acciai to improve not only its efficiency, but also the quality that is offered, in order to better meet our customers’ needs.

View more